Do you work directly with tenants on TI installation or only through general contractors?

Both. InSev Tech works directly with tenants negotiating TI scope with their landlord, with GCs coordinating installation into construction schedules, and with property managers overseeing TI for their tenants. CA Lic. B/D28 covers the full installation scope.

Can you install dock equipment in an existing pit configuration?

Yes. Most dock leveler replacement goes into an existing pit — pit dimensions and condition are verified before equipment selection to ensure the new leveler fits correctly. Pit modification for out-of-spec dimensions may be needed in some legacy buildings.

Do you offer follow-on PM after installation?

Yes. InSev Tech offers PM programs beginning at the manufacturer-recommended first service interval after installation — maintaining warranty compliance and building a documented service history from day one.

Industrial warehouse loading dock under construction in Southern California

Installation

Commercial & Industrial Door & Dock Installation Across Southern California

New construction, tenant improvement, and equipment replacement — InSev Tech installs commercial doors and loading dock equipment to manufacturer specification across Southern California's industrial market. All major brands, CA Licensed B/D28, with follow-on PM and emergency service available after installation completion.

CA Lic. #1052928 B/D28
New Construction & TI
All Major Brands
Prologis · EastGroup · Rexford

Call (657) 377-0809 Request a Quote

Installation Scenarios We Handle

Tenant Improvement (TI) Installation

When a new tenant takes a Southern California industrial building — in Fontana, Ontario, Rancho Cucamonga, or any Inland Empire market — the TI scope often includes dock leveler upgrades, dock seal replacement, vehicle restraint installation, and high-speed door or sectional door additions.

InSev Tech works with general contractors and directly with tenants on TI door and dock installation — coordinating installation around construction schedule milestones and occupancy permit requirements.

CA Lic. B/D28 covers the full installation scope — no subcontracting for door and dock components.

Equipment Replacement & Modernization

When existing dock levelers, high-speed doors, or sectional overhead doors reach end of service life, replacement with current equipment provides improved cycle rating, energy efficiency, and compliance with current OSHA, UL 325, and NFPA 80 standards.

InSev Tech replaces existing equipment in existing pit and header configurations where possible — minimizing construction scope for equipment replacement at operating facilities in the Inland Empire, Los Angeles County, and Orange County.

New Construction Installation

Coordinating door and dock installation with general contractors on new industrial construction in Southern California's active development markets — Inland Empire, Riverside County, and San Diego County.

InSev Tech works with GCs on Prologis, EastGroup, Rexford, and private developer industrial construction — scheduling dock leveler pit installation, dock seal mounting, and door operator rough-in to coordinate with concrete and framing milestones.

Cold Storage & Specialized Installations

Cold storage facility installations require cold-rated dock seals, insulated sectional doors, high-speed cold storage doors, and dock leveler configurations compatible with refrigerated trailer operations — not standard ambient-temperature equipment.

InSev Tech specifies and installs cold-rated door and dock equipment for refrigerated warehouse construction and retrofit in Chino, Ontario, Vernon, and the broader Southern California cold storage market.

Door & Dock Equipment We Install

Dock Equipment

Loading Dock Levelers

Hydraulic, mechanical, and air-powered dock levelers — new pit installation and surface mount. Rite-Hite, Kelley, Blue Giant, Pentalift, and all major brands.

Edge-of-Dock (EOD) Levelers

Edge-of-dock leveler installation for docks without a pit — dock face mounting, correct lip projection for the trailer bed range, and capacity matched to forklift and load weight. Bluff, Copperloy, Blue Giant, Kelley, and all major brands.

Vehicle Restraints

ICC bar and hydraulic restraint installation — dock face mounting with interior and exterior signal systems. All major brands.

Dock Seals & Shelters

Foam pad and inflatable dock seal installation — dock face mounting with correct projection geometry for the trailer profile at each dock position. All major brands.

Dock Bumpers

Standard and heavy-duty dock bumper installation — correct height and projection for dock leveler lip geometry.

Door Equipment

High-Speed Doors

Fabric and rigid high-speed door installation — header mounting, guide track installation, control board wiring, and sensor calibration. Rytec, Albany, BMP, Dynaco, and all brands.

Rolling Steel Doors

Coiling door installation — hood mounting, guide track, and operator installation. Cornell, Cookson, ASTA America, Porvene, and all brands.

Sectional Overhead Doors

Track installation, spring tension calibration, and operator mounting — Clopay, Wayne Dalton, Overhead Door, Raynor, and all brands.

Automatic Pedestrian Doors

Sliding, swing, and folding automatic door installation — header mounting, sensor calibration, and ANSI/BHMA A156.10 commissioning documentation.

Selecting the Right Brand for Your Facility — What InSev Tech Recommends

High-Cycle Distribution

For 20+ daily cycles at dock positions in Fontana, Ontario, and Eastvale distribution facilities — hydraulic dock levelers (Rite-Hite or Kelley) rated for high-cycle applications, high-speed doors (Rytec or Albany) rated for 500,000+ annual cycles, and high-cycle vehicle restraints. Higher upfront cost but significantly lower per-cycle maintenance cost over facility life.

Food & Cold Storage

For food manufacturing and refrigerated warehouse applications — cold-rated dock seals with foam retention for repeated thermal cycling, insulated sectional doors (Haas or Clopay 730 series), cold storage high-speed doors (Albany RR Cold or Rytec Turbo Seal), and hydraulic dock levelers with cold-grade fluid.

Light Industrial & Commercial

For lower-cycle light industrial and commercial applications — mechanical dock levelers (lower upfront cost, adequate for 5-15 daily cycles), standard sectional overhead doors (Clopay or Wayne Dalton), and foam pad dock seals. Standard commercial components with readily available parts support.

Service Continues After Installation Completion

Installation is the start of your door and dock equipment lifecycle — not the end of the service relationship.

InSev Tech offers PM programs beginning at the first scheduled service interval after installation — so your new equipment starts its operating life with documented preventive maintenance from day one.

For TI projects where the tenant has an ISNetworld vendor compliance requirement, InSev Tech is pre-qualified through NLY Construction Inc's Preferred A-rated status — the same contractor who installed the equipment can remain as the approved vendor for ongoing service and PM.

Baldwin Park Dock Leveler Installation

Same-day onsite assessment followed by a three-hour installation the next day at a distribution facility.

Read Case Study →

Ontario Dock Shelter & EOD Leveler Installation

Customer-supplied shelters did not fit the dock projection — custom frames built on site and the job finished in three days.

Read Case Study →

Preventive Maintenance After Installation

PM programs starting at first service interval — all brands we install, quarterly or semi-annual.

View PM →

24/7 Emergency Service

Same-day emergency dispatch if new equipment fails — we know what we installed.

Emergency Service →

ISNetworld Pre-Qualified

NLY Construction Inc Preferred A-Rated — approved vendor status for facilities requiring ISNetworld compliance.

Learn More →

Installation — Cities We Cover

See all service areas →

Frequently Asked Questions

Credentials

Licensed, Registered & Prequalified

Field services are backed by a licensed contracting entity, public-works registration, small business and DVBE certification, safety prequalification, and industry membership.