OSHA & NFPA 80 Compliance for
Loading Docks & Commercial & Industrial Doors
Equipment safety inspections, fire door testing, and compliance documentation — all in one visit.
Request Compliance Review →Two Standards That Apply to Your Facility
OSHA
OSHA Equipment Safety
OSHA 29 CFR 1910.176 requires that loading dock equipment — dock levelers, vehicle restraints, dock plates, and commercial overhead doors — be maintained in safe working condition. Non-functional restraints, damaged leveler lips, and improperly adjusted door closing forces are common OSHA citation targets.
OSHA 1910.23 also governs dock edges, walking surfaces, and bridge plates — areas that inspectors frequently flag in warehouse environments.
NFPA 80
NFPA 80 Fire Door Testing
NFPA 80 requires annual inspection and drop testing of all fire-rated door assemblies — including rolling steel dock doors, sectional doors in fire-separation walls, and corridor fire doors throughout the facility.
Inspection results must be documented and retained for the life of the door assembly, and are commonly reviewed during insurance audits and fire marshal inspections.
What InSev Tech Covers in a Compliance Visit
OSHA Dock Equipment
- Dock leveler condition and lip extension function
- Vehicle restraint engagement and release function
- Dock bumper condition
- Dock board and bridge plate integrity
- Dock edge condition
- Commercial overhead door closing force and safety cable condition
- Door limit switch and auto-reverse function
NFPA 80 Fire Doors
- Door leaf condition (no holes, damage, or gaps)
- Frame and anchorage integrity
- Self-closing device function
- Positive latching verification
- Drop test / release mechanism test
- Smoke seal and gasketing condition
- Hardware condition and function
- Inspection documentation and labeling
Most Common Issues We Find on Site
Vehicle restraints that won't engage
One of the most common OSHA citation triggers — and a safety risk for every truck that docks.
Dock leveler lips that won't hold
A leveler that drops unexpectedly creates injury risk and OSHA exposure.
Failed fire door drop tests
Fire doors that don't release and close under gravity fail NFPA 80 and must be repaired before the next inspection cycle.
No inspection documentation
Many facilities have functioning doors but no paperwork — leaving them exposed during insurance audits.
Damaged dock seals
Beyond energy loss, torn dock seals create pest entry points that trigger food safety audit findings.
Commercial overhead door safety cable failures
A broken torsion spring without a functioning safety cable is an OSHA violation and injury liability.
What You Receive After Each Compliance Visit
After every inspection, InSev Tech provides a written compliance report covering all equipment inspected, conditions found, deficiencies identified, and corrective actions recommended.
For NFPA 80 fire door inspections, the report meets the documentation requirements of NFPA 80 Section 5.2 and is suitable for submission to fire marshals, insurance carriers, and facility auditors.
For OSHA dock equipment inspections, the report documents due diligence and can be retained as evidence of a proactive maintenance program.
Facilities That Need This Service
Frequently Asked Questions
Schedule a compliance review for your facility.
ISNetworld Preferred A-rated Contractor. Serving Southern California. CA Lic. #1052928 B/D28.